Skip to main content

Node Exporter Service

Introduction​

This guide will provide instructions on how to install Node Exporter as a service in Ubuntu 24.04.

Prerequisites​

Prometheus should be set up

Grafana should be connected to your Prometheus instance

Download and Install node_exporter​

Navigate to the node_exporter download and locate the release with the "Latest" tag. At the time of this wiki that is node_exporter-1.8.2.linux-amd64.tar.gz and it will be used as an example in future commands within this wiki.

Downloaded the latest version to the home directory

wget -P ~/ https://github.com/prometheus/node_exporter/releases/download/v1.8.2/node_exporter-1.8.2.linux-amd64.tar.gz

Extract the downloaded file

tar -xvf ~/node_exporter-1.8.2.linux-amd64.tar.gz

Move the extracted files

sudo mv ~/node_exporter-1.8.2.linux-amd64/node_exporter /usr/local/bin/

Remove the unneeded files

rm -rf ~/node_exporter-1.8.2.linux-amd64*

Create the node_exporter user

sudo useradd -r -s /bin/false -c "Node Exporter service account" -d /nonexistent node_exporter
  • '-r': Creates a system account with a UID < 1000, typically used for system services.
  • '-s /bin/false': Disables shell access for the user.
  • '-c' "Node Exporter service account": Adds a comment for clarity.
  • '-d /nonexistent': Sets the home directory explicitly to a non-existent directory, further ensuring the account is restricted.

Set the user permissions

sudo chown node_exporter:node_exporter /usr/local/bin/node_exporter

Create the service

sudo nano /etc/systemd/system/node_exporter.service

Add the following configuration, the press ctrl + x, then y, then enter to save.

[Unit]
Description=Node Exporter
Wants=network-online.target
After=network-online.target

[Service]
User=node_exporter
Group=node_exporter
Type=simple
ExecStart=/usr/local/bin/node_exporter

[Install]
WantedBy=multi-user.target

Reload the daemon

sudo systemctl daemon-reload

Start the service

sudo systemctl start node_exporter

Enable service to start on boot

sudo systemctl enable node_exporter

Verify the status

sudo systemctl status node_exporter

You should see it is enabled and active

service-enabled

Update Prometheus Config​

Update the Config​

Open up the prometheus config

sudo nano /etc/prometheus/prometheus.yml

Then add a new job for node_exporter

  - job_name: 'node_exporter'
    static_configs:
      - targets: ['localhost:9100']
        labels:
          instance: '<hostname>'

If the PC that you are installing node_exporter on is not the host that is running prometheus, then you should use the IP of the host that you are installing node_exporter on instead of localhost.

Restart the prometheus service

sudo systemctl restart prometheus

Verify Target is Up​

To be sure the node_exporter target was loaded, check the web frontend for Prometheus. Click the "Status" menu item in the navbar and then the "Targets" menu item to see all connected targets

target-up

Importing the Dashboard​

There is a default dashboard that you can import to get started. Open up Grafana, go to "Dashboards" and then click the button "New", from the dropdown select "Import". Then enter 1860 where it says "URL or ID". Then click "Load"

I usually make the name a bit more descriptive and change the UID slightly as well. Then select the Prometheus data source you set up. Finally click "Import"

import

You should see the dashboard load with the default layout.

dash

And that's it! You can now monitor your PC easily from anywhere. You can even add alerts and other cool things, but that is outside the scope of this guide.